Heavy Instruments

Sterile Garment Storage Cabinet

1. Air flow type: - Vertical Air flow from the top. 2. Air Flow Velocity :- 90 FPM ±20%, Inflow Velocity: 0.53 m/s,Down flow Velocity: 0.33 m/s 3. Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA & Very low vibration 4. Filtration Assembly: - Room air is drawn from the top of the cabinet through a Pre-Filter, then the air pass through HEPA Filter and spread evenly in the working area providing a constant a stream of clean air flow within the work area. • Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU – 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable. • HEPA Filteris Mini pleat type, made from water-resistant, fire retardant, imported micro-fine glass fiber media; conforms to EU – 14 Grade, with an efficiency rating better than 99.999% for 0.3 μ. These filters are designed to accommodate higher air flow volume. • Perforated diffuser screen /shield mesh guard protect Filters from damage. 5. Pressure manometer to track filter pressure & air/gas cock inside the working area Easy removable back/front panel for easy access to electrical fittings and easy removable filter placement for ease of access during service. 6. Wheels: -Mounted on heavy tubular stand with lockable castors.

Plant Growth Chamber

1. Two Door systems – Outer body/door is MS- powder coated with 5 mm thick acrylic window to view inside. Magnetic door closer with gasket. Inner thick transparent acrylic/Plexi glass to view the specimen without disturbing the inner samples. 2. Inside air circulation fan to maintain uniform temperature of the chamber. 3. Indirect heating system is provided, comprising of air heaters of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring very good temperature sensitivity. 4. An energy efficient cooling unit – CFC Free compressor is installed – Emerson –Copeland Product. 5. Inside the chamber – water reservoir is there with a immersion heater. An in-built water level cut off system is inside the water reservoir to maintain proper water level. Water level cut off system is connected with a valve inside control panel – when low water the valve opens and when water is filled valve get closed. So, the water level is maintained perfectly- (Water level controller need to be cleaned on regular basis so that it works perfectly or else chances of overflow is there) 6. CFL Lamps inside the chamber for proper illumination to view the samples. 7. Control Panel – Comprises of Temperature +Humidity controller + Light Controller. Temperature and humidity is interconnected and dependent on each other. 8. Inside 4-16 no’s of light present. Light controllers have – 25%, 50%, 75% and 100%. Light Controller controls the no of lights to be run and the desired time. Timer for light is inbuilt in the light controller segmented in 24 hours – CAN BE SET AS PER NEED.

Biosafety Cabinet Type-3

work table top: - SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE. Single piece without Any internal joint or welding with below spillage collection zone. The work table can be removed for cleaning of the spillage. Front & rear air grille at the working chamber. 12. Front door – Sash is sealed and fixed with glove and ports for access to the work zone and enhanced user safety. Ergonomic and comfortable sloped front window for comfortable head and elbow rest position, thus reducing fatigue. UV – protected to protect customer from UV Exposure – complete transparent along with base structure to hold the cabinet & ease of access.

Reverse laminar flow sampling booths for clean room

1. Material of Construction: -Outer Body- CRCA Sheet epoxy Powder coated antibacterial & Antirust effect, 22 gauge/ OR Stainless Steel- 304 PVC /Matt grit/ Sattin finish, 22 GAUGE. Inner Body SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE. 2. Air flow type& Velocity: -Recirculating type air flow 3. Air Flow Velocity :- 90 FPM ±20%, Inflow Velocity: 0.53 m/s,Down flow Velocity: 0.33 m/s 4. At the base of the rear wall there is Prefilter to capture the airborne generated contaminants. Intake velocity at pre-filters increases to offer scavenging effect. 5. Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA & Very low vibration 6. Filtration Assembly: - 3 stage filtration system with HEPA Filtered Exhaust mechanism. When the Booths is operating under normal conditions air is pulled through the main working chamber to exhaust grills, normally situated in the rear of the Booths, suppressing air-borne dust away from the operators breathing zone.Room air is drawn from the bottom of the cabinet through a Pre- Filter, then the air pass through a Fine Filter &HEPA Filter& Filtered air supplied from top to the working area providing aconstant a stream of clean air flow within the work

Industrial Kitchen Equipment

Commercial Kitchen Equipment Kitchen Equipment

Air Shower

Material Handling Air Shower are -auto Controlled interlocking systems for entrance, such that the entry and exit doors are electronically interlocked and photoelectric sensor suited self- contained units, installed at the entrance of a clean room and other controlled environment chambers for minimizing the entry of dust particles and other particulate matters into the working area. Its principle of operation is the impulsion of jets of Hepa - filtered air at high speed on the person or material to be cleaned to produce the separation of the particles deposited on its surface. The contaminated air is again filtered and re- circulated. With-in seconds, the person entering into air shower comes out entirely cleans i.e. free from harmful dust . In any case, it is important to highlight that the most convenient to achieve maximum effectiveness is an enclosure for individual use in which the useful space must not exceed 80 – 90 cm

Commercial Hospitality Services ,

Hospitality Services

Laboratory Furniture

Laboratory Furniture full ss

HUMIDITY CABINET

Indirect heating system is provided, comprising of air heaters of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring very good temperature sensitivity. 8. An energy efficient cooling unit – CFC Free compressor is installed – Emerson –Copeland Product. 9. Inside the chamber – water reservoir is there with a immersion heater. An in-built water level cut off system is inside the water reservoir to maintain proper water level. Water level cut off system is connected with a valve inside control panel – when low water the valve opens and when water is filled valve get closed. So, the water level is maintained perfectly- (Water level controller need to be cleaned on regular basis so that it works perfectly or else chances of overflow is there) 10.CFL Lamps inside the chamber for proper illumination to view the samples.

Laminar Air Flow Vertical

Work table top:-SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE Front door and side covered with UV protected 5 mm Acrylic sheet to protect customer from UV Exposure – complete transparent. Permanent magnet to hold Air flow type: - Horizontal Air flow from the front. Air Flow Velocity:- 90 FPM ±20%, Inflow Velocity: 0.53 m/s,Down flow Velocity: 0.33m/s Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA& Very low vibration Filtration Assembly: - Room air is drawn from the bottom of the cabinet through a Pre- Filter, then the air pass through HEPA Filter and spread evenly in the working area providing a constant a stream of clean air flow within the work area. Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh onair leaving side; conforms to EU – 4 / G-4 Grade, with the efficiency of down to 10microns. These filters can be cleaned by compressed air & also washable. HEPA Filteris Mini pleat type, made from water-resistant, fire retardant, importedmicro-fine glass fiber media; conforms to EU – 14 Grade, with an efficiency rating better than 99.999% for 0.3 μ. These filters are designed to accommodate higher air flovolume. Perforated diffuser screen /shield mesh guard protect Filters from damage. Front angular 10 degree slope helps reduce fatigue of user. Pressure manometer to track filter pressure & air/gas cock inside the working area Top removable panel for easy access to electrical fittings and easy removable filter

Biosafety Cabinet - B2

Ambient air is taken through HEPA - filter at the top of the cabinet and passes through down flow HEPA Filter and enter working zone as laminar flow, the uniform non turbulent air stream protects against cross contamination within & throughout the work area. Near the work surface area splits in two, one move towards the front grille and another towards back rear grille. Ambient air is also taken via front grille but doesn’t mix with the clean air within the work zone. A combination of inflow and down flow air streams forms an air barrier that prevents contaminated room air entering work zone and enters common air plenum and then exhaust by dedicated ducting system , 100% air exhaust Exhaust air pass through HEPA Filter & Virus burn unit ,Exhaust ducting with L- Bent PVC pipe supplied with the machine

Hot Air Oven

Fume Hood

PCR Workstation

PCR Workstation is used to ensure consistent intensity delivery of UV radiation all over the place. It is designed by using superior quality raw material under the guidance of well trained and experienced professional experts. It is known for its low operational noise, energy saving feature, stability, and durability. Our range of PCR Workstation can be customized as per the requirements of our clients.

Vertical Autoclave

Vertical Autoclave is widely used for the day to day sterilization procedures and in various laboratory applications. It is required for wet heat sterilization of medical equipments, chemicals, swabs, glassware, and media. This autoclave is fabricated using high grade stainless steel having double walled construction. It is provided with a manually operated lid lock with pressure adjusting nozzle and reading meter. This Vertical Autoclave is most commonly utilized in hospitals, research centers, laboratories, and food & beverage units.

Horizontal Laminar Air Flow

Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU – 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable. HEPA Filteris Mini pleat type, made from water-resistant, fire retardant, imported micro-fine glass fiber media; conforms to EU – 14 Grade, with an efficiency rating better than 99.999% for 0.3 μ. These filters are designed to accommodate higher air flow volume.

Biosafety Cabinet A2

Biosafety Cabinet is used to perform work on the material contaminated with the pathogen. It is manufactured using stainless steel for easy cleaning and maintenance and excellent powder coating finish helps to prevent microbial or bacterial growth. It has been designed and manufactured in compliance with international quality standards and known to deliver effective performance. Customers can easily grabbed this Biosafety Cabinet from market at pocket friendly prices.

Vertical Laminar Air Flow

Outer Body- CRCA Sheetepoxy Powder coated antibacterial& Antirust effect, 22 gauge ORStainless Steel-304PVC /Matt grit/ Sattin finish, 22 GAUGE Work table top:-SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE Front door and side covered with UV protected 5 mm Acrylic sheet to protect customer from UV Exposure – complete transparent. Permanent magnet to hold Air flow type: - Horizontal Air flow from the front. Air Flow Velocity:- 90 FPM ±20%, Inflow Velocity: 0.53 m/s,Down flow Velocity: 0.33m/s Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the a blower is less than 55 dBA& Very low vibration